A low NOx emission type burner employing a three-stage combustion sir supply system and self-recirculation of exhaust and operates with low-level excess air combustion.
Fuel | Oil, Gas, and Oil/Gas Mixed |
---|---|
Draft Type | Natural draft, forced Draft |
Combustion Capacity | 2.0-20.0 ×106kJ/h(Natural draft) 2.0-30.0 ×106kJ/h(Forced draft) |
A low NOx emission type burner which employs a two-stage fuel gas supply system and operates with low-level excess air combustion.
Fuel | Gas |
---|---|
Draft Type | Natural draft, Forced draft |
Combustion Capacity | 2.0-20.0 ×106kJ/h(Natural draft) 2.0-25.0 ×106kJ/h(Forced draft) |
Any type of fuel-oil, gas or pulverized coal can be combusted in this burner. Mixed feeding of different fuels is also possible.
The burner consists of three concentric rings. In the center is an oil burner.Around it is a gas burner, and around the gas burner is a pulverized coal burner.Primary air is supplied between each burner.
Capacity | 5~5,000 GJ/h |
---|---|
Applications | Calcination of cement, limestone, limestone mud Calcination of Alumina, Nickel ore, Iron ore pellet Incineration of waste materials |
Constructed completely of metal, this combustor is designed for high pressure/highly intensified air generation.
This air generator can reach the maximum enthalpy condition within two minutes after ignition because of its all metal construction. Furthermore, there is no risk of solid matter dispersion into the slipstream because of its non castable refractories construction.
An air heater used for starting up the Fluid Catalytic Cracking Unit and Residue Fluid Catalytic Cracking Unit.
NFK has provided over 30 units to the world famous processes such as UOP, EXXON. SIRM and S
& W.
A wicket and natural draft type heater with three sets of upward vertical burners on its furnace bed.
Fluid | High pressure air |
---|---|
Capacity | 32,400㎏/h |
Intel Condition | 60℃, 500KPa |
Outlet Condition | 440℃, 494KPa |